Some customers buy rotary encoder is used to connected to the motor used on rotary encoder and motor connection step generally includes four steps: to determine the installation position, opening, connectors, installation and check later.
Details are as follows: first, the general model to determine the installation position of motor due to the output shaft is shorter, leading to the installation of the motor pulley, basically have no place left for rotary encoder installed, so you need to determine the installation position, to ensure that the connector play a role of speed in the later use.
When the output shaft without a place, usually choose to install the rotary encoder part after the encoder, looking for a good time, as long as the position is not affect performance of rotary encoder;
Second, after opening to determine the installation position, the next step is to open holes, usually on the motor end cover after open a hole transition, in order to ensure the rotary encoder has the stable performance in the later use, need to install a transition shaft after motor repair, play a supporting role, you also need to after the motor end cover above with an s-shaped sheet steel have the effect of double fixed.
On opening items, small make up also need to remind everybody here is after opening is based on determine the installation position, so in order to ensure the hole size and rotary encoder connected close, need to keep the relativity of two shaft axis;
Third, install the connector in order to ensure the stability of rotary encoder and the motor connection, need to install a connector between the two, connect one motor, rotary encoder, on the other side on the choice of connector requirement is not high, connectors can be used;
Four, check after completing the above steps, the following is the aftermath of the important examination, don't ignore the examination link, check but can small, give an example, in the installation, may be due to not attentive joint without reinforcement, a loose, it will inevitably affect equipment running late.
Shanghai electronic products specializing in the production of rotary encoder for 27 years, research and development production of magnetoelectric encoder performance not easily affected by dust and condensation;
Its simple and compact structure, non-contact, long life, high and low temperature resistance, resistance to vibration, fast response speed and low cost, the factory has advanced production equipment and testing equipment, quality and large cargo carefree!
Looking for looking for electronic encoder manufacturers.