 |
| Quantity: | |
|---|---|
K10 is a large aperture hollow shaft incremental encoder type, it has various shaft diameter to be selected, suitable for all kinds of applications, the special 9-pin connector makes it easier to intall or take down.Besides, the optional spring plates allow to fit into different mounting dimensions.
Features:
sturdy and durable,optional various output mode,
long service life,low price,etc
external diameter φ100mm,thickness 38mm,diameter of shaft up to tφ45mm
Resolution: up to 48000P/R
Supply voltage: DC5V:DC8-30V
Protection:IP50
Cablelength:1000mm
Our advantages
1. The max diameter of 45mm,the hoop locking hollow shaft, which is convenient for locking and has strong bearing capacity.
2. Die-cast aluminum alloy shell, solid and durable, long service life
3. 9-pin socket with cable output, wiring is more simple and convenient
4. Specially used to drive the rotation of the shaft , make it faster and easier to adjust the position of the zero position for encoder
5. igid spring plate, suitable for installation of various sizes, soft connection increases concentricity and reduces angle error
6. High precision up to 48,000 pulses
Items | Basic parameters |
Brand | HENGXIANG |
Encoder type | Incremental encoder |
External diameter | 100mm |
Thickness | 38mm |
Installation dimension | R50mm(spring plate 100T90) |
Hollow shaft type | through hole (clamping ring at prior and clamping ring at rear) |
Hollow shaft diameter | 30mm,35mm,38mm;40mm;42mm；45mm； |
Resolution | 100;360;512;1000;1024;1200;2000;2048;2500;2880;3000;3600; 4096; 5000;5760;8192;10000；11520;12000;20000;24000;40000;48000; |
2048/6;2048/8;2048/10;2500/4;2500/6;2500/8;2500/16; 4096/4;4096/6;4096/8;4096/16;5000/6;5000/8;5000/10;5000/12; | |
8192/6;8192/8;/8192/10;10000/6;10000/8;10000/10;10000/16; | |
Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
Supply voltage | DC5V ; DC8-30V |
Outlettype | Socket out from side |
Output mode | NPN/PNP(Open Collector Output) |
Voltage output | |
Push-pull output | |
line drive (26LS31) TTL | |
line drive(DC8-30V) HTL | |
Consumption current | 100mA MAX |
Top response frenquency | 300KHZ |
Allowable ripple | ≤3%rms |
Load Voltage | ≤DC30V |
GND | not connect to encoder |
Mark to Space ratio | 45% to 55% |
starting torque | less than 98 x 10-3 N.m |
Intertia moment | less than 120x 10-6kg.m2 |
Shaft load | Radial 90N; Axial 60N |
Top REV | 3000RPM |
Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
Environmental temperature | Operating:-20 ～+85°；storage:-25 ～+90° |
Enviromental humidity | Operating and storage: 35-85%RH(noncondensing) |
Vibration(endure) | Amplitude 0.75mm,5-55Hz,2 hours for three axis individually |
Sock(endure) | 1960m/s2 ,11 ms three times for X,Y,Z direction individually |
Shaft Material | Stainless steel |
Shell Material | Dia cast aluminium |
Cable length | 1000mm(cable with shielding) |
Protection grade | IP50 |
Cable length | 1M (cable length could be added appropriately by |
require, but it need payment individually) | |
Certification | CE |
package | Carton box |
Net weight | About 670g (with package) |
Applications:
Here are some specific applications of S38 incremental encoders
l Drawworks drums, mud pumps, catwalks, hoists, winches & motors
l Motor and drive speed feedback
l Converting Machinery
l Material Handling
l Packaging Equipment
l Pickling Equipment
l Processing Equipment
l Elevators
l PLC’s and electronic counters musement rides
Shanghai Hengxiang Optical Electronics Co., Ltd. is a high-tech enterprise specializing in the creation, research, production, and marketing of high-precision optical encoders. We have a mature independent research and development capability, which enables to customize the production of exclusive models based on the needs of new development technology products. We founded in 2001 and exported products to domestic and overseas after 21 years of sedimentation. Our company mainly engaged in the encoder, optical lens, germanium products, etc. The strict control of product quality and high precision and high standard of deep processing technology serve the elevator, motor, CNC, textile, robot, wind power, medical, assembly line equipment, and other automation technology industries.
We focus on being a well-known brand in the field of precision optical encoders and aim to be a leader in international precision encoders.
"Precision in Sensing for a Sci-tech Life.” "Hengxiang will adhere to the corporate principles of "Integrity, Precision & Pragmatism, Customer-oriented, Unity and Mutual-success".
Q: What's your major products?
A: Our company established products from optical lens and encoder disk,which provide a strong theoretical basis for encoders, after 20 years development, we exteneded our business to encoders , this is why our quality is highly assured and won positive feedback compared to other encoder factory.
Q: Are you a manufacturer or a agency?
A: We are a factory for over 23 years of manufacturing experience,welcome to visit our factory,we are located in Shanghai city, China.
Q: Can I customize an encoder if there's no similar parameters from your current catalog?
A: Yes, we can provide customized services,we also have laser printing machines to custom your own logo or part number;
If you would like to get an equivalent products for other brands,you may contact us to get an accurate price and parameters confirmation, we will reply you within one hour in working time.
Q: What is your MOQ?
A: MOQ is 1pcs for our regular encoders.
Q: How long does the lead time take?
A: Delivery takes within 1 week for samples,about 10 days for mass order for regular encoders.
K10 is a large aperture hollow shaft incremental encoder type, it has various shaft diameter to be selected, suitable for all kinds of applications, the special 9-pin connector makes it easier to intall or take down.Besides, the optional spring plates allow to fit into different mounting dimensions.
Features:
sturdy and durable,optional various output mode,
long service life,low price,etc
external diameter φ100mm,thickness 38mm,diameter of shaft up to tφ45mm
Resolution: up to 48000P/R
Supply voltage: DC5V:DC8-30V
Protection:IP50
Cablelength:1000mm
Our advantages
1. The max diameter of 45mm,the hoop locking hollow shaft, which is convenient for locking and has strong bearing capacity.
2. Die-cast aluminum alloy shell, solid and durable, long service life
3. 9-pin socket with cable output, wiring is more simple and convenient
4. Specially used to drive the rotation of the shaft , make it faster and easier to adjust the position of the zero position for encoder
5. igid spring plate, suitable for installation of various sizes, soft connection increases concentricity and reduces angle error
6. High precision up to 48,000 pulses
Items | Basic parameters |
Brand | HENGXIANG |
Encoder type | Incremental encoder |
External diameter | 100mm |
Thickness | 38mm |
Installation dimension | R50mm(spring plate 100T90) |
Hollow shaft type | through hole (clamping ring at prior and clamping ring at rear) |
Hollow shaft diameter | 30mm,35mm,38mm;40mm;42mm；45mm； |
Resolution | 100;360;512;1000;1024;1200;2000;2048;2500;2880;3000;3600; 4096; 5000;5760;8192;10000；11520;12000;20000;24000;40000;48000; |
2048/6;2048/8;2048/10;2500/4;2500/6;2500/8;2500/16; 4096/4;4096/6;4096/8;4096/16;5000/6;5000/8;5000/10;5000/12; | |
8192/6;8192/8;/8192/10;10000/6;10000/8;10000/10;10000/16; | |
Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
Supply voltage | DC5V ; DC8-30V |
Outlettype | Socket out from side |
Output mode | NPN/PNP(Open Collector Output) |
Voltage output | |
Push-pull output | |
line drive (26LS31) TTL | |
line drive(DC8-30V) HTL | |
Consumption current | 100mA MAX |
Top response frenquency | 300KHZ |
Allowable ripple | ≤3%rms |
Load Voltage | ≤DC30V |
GND | not connect to encoder |
Mark to Space ratio | 45% to 55% |
starting torque | less than 98 x 10-3 N.m |
Intertia moment | less than 120x 10-6kg.m2 |
Shaft load | Radial 90N; Axial 60N |
Top REV | 3000RPM |
Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
Environmental temperature | Operating:-20 ～+85°；storage:-25 ～+90° |
Enviromental humidity | Operating and storage: 35-85%RH(noncondensing) |
Vibration(endure) | Amplitude 0.75mm,5-55Hz,2 hours for three axis individually |
Sock(endure) | 1960m/s2 ,11 ms three times for X,Y,Z direction individually |
Shaft Material | Stainless steel |
Shell Material | Dia cast aluminium |
Cable length | 1000mm(cable with shielding) |
Protection grade | IP50 |
Cable length | 1M (cable length could be added appropriately by |
require, but it need payment individually) | |
Certification | CE |
package | Carton box |
Net weight | About 670g (with package) |
Applications:
Here are some specific applications of S38 incremental encoders
l Drawworks drums, mud pumps, catwalks, hoists, winches & motors
l Motor and drive speed feedback
l Converting Machinery
l Material Handling
l Packaging Equipment
l Pickling Equipment
l Processing Equipment
l Elevators
l PLC’s and electronic counters musement rides
Shanghai Hengxiang Optical Electronics Co., Ltd. is a high-tech enterprise specializing in the creation, research, production, and marketing of high-precision optical encoders. We have a mature independent research and development capability, which enables to customize the production of exclusive models based on the needs of new development technology products. We founded in 2001 and exported products to domestic and overseas after 21 years of sedimentation. Our company mainly engaged in the encoder, optical lens, germanium products, etc. The strict control of product quality and high precision and high standard of deep processing technology serve the elevator, motor, CNC, textile, robot, wind power, medical, assembly line equipment, and other automation technology industries.
We focus on being a well-known brand in the field of precision optical encoders and aim to be a leader in international precision encoders.
"Precision in Sensing for a Sci-tech Life.” "Hengxiang will adhere to the corporate principles of "Integrity, Precision & Pragmatism, Customer-oriented, Unity and Mutual-success".
Q: What's your major products?
A: Our company established products from optical lens and encoder disk,which provide a strong theoretical basis for encoders, after 20 years development, we exteneded our business to encoders , this is why our quality is highly assured and won positive feedback compared to other encoder factory.
Q: Are you a manufacturer or a agency?
A: We are a factory for over 23 years of manufacturing experience,welcome to visit our factory,we are located in Shanghai city, China.
Q: Can I customize an encoder if there's no similar parameters from your current catalog?
A: Yes, we can provide customized services,we also have laser printing machines to custom your own logo or part number;
If you would like to get an equivalent products for other brands,you may contact us to get an accurate price and parameters confirmation, we will reply you within one hour in working time.
Q: What is your MOQ?
A: MOQ is 1pcs for our regular encoders.
Q: How long does the lead time take?
A: Delivery takes within 1 week for samples,about 10 days for mass order for regular encoders.
